Axial Piston Pumps
H1C Series
The H1C series pumps are bent axis, axial piston hydraulic units with fixed displacement for operation in open circuit. H1C series pumps are available in metric and SAE mounting configuration.
Displacement:
from 6.067 to 225.1 cm³/rev
from 0.37 to 13.73 in³/rev Flow range:
from 30.3 to 360 l/min
[from 7.99 to 95 U.S. gpm] Input speed:
up to 5000 rpm (Max) Pressure range:
from 350 to 450 bar (Max)
[from 5075 to 6525 psi (Max)] Max torque:
1613 Nm [1189 lbf * ft]
SH11C Series
The SH11C series pumps are bent axis, axial piston hydraulic units with fixed displacement for operation in open circuit. SH11C series pumps are available in metric and SAE mounting configuration.
Displacement:
56.35 cm³/rev [3.437 in³/rev] Flow range:
112 l/min
[29.5 U.S. gpm] Input speed:
up to 3750 rpm (Max) Pressure range:
480 bar (Max)
[6960 psi (Max)] Max torque:
431 Nm [317.65 lbf * ft]
H1V Series
H1V series are a family of variable displacement axial piston pumps, bent axis design, for operation in open circuit. The high quality components and manufacturing techniques make possible for these pumps to perform at maximum efficiency and long life. Versatile design includes a variety of controls and shaft ends that will adapt the H1V series pumps to any application both industrial and mobile. H1V series pumps are available in both metric and SAE mounting flange configuration.
Displacement:
from 54.8 to 225.1 cm³/rev
from 3.34 to 13.73 in³/rev Flow range:
from 143 to 338 l/min
[from 37.8 to 89.2 U.S. gpm] Input speed:
up to 3700 rpm (Max) Pressure range:
from 350 to 450 bar (Max)
[from 5075 to 6525 psi (Max)] Max torque:
1613 Nm [1189 lbf * ft]
H1V/PV Series
The H1V PV pumps have been specially designed for pumping and metering polyurethane components with viscosity in the 1-2000 cSt range (polyoils and isocyanates). The high repeatability of the delivery and the accuracy of the metering make the H1V PV pump suitable for use on injection systems. The choice of the materials and seals is aimed at considerably increasing the pump’s life compared to other solutions currently used on these types of machines. The pump is designed in such a way that an external flushing circuit can be provided on the shaft seal, aimed at increasing its life; the flushing fluid doesn’t have a preferential direction, the direction shown in the user’s manual is purely an indication. The pump is not supplied with any hand wheel, which must be requested separately. The H1V PV pumps allow reaching higher casing pressures if compared with standard ones. All units are tested using ISO VG 46 mineral oil.
Displacement:
from 6.3 to 30 cm³/rev
from 0.38 to 1.83 in³/rev Flow range:
from 11.3 to 54 l/min
[from 2.98 to 14.26 U.S. gpm] Input speed:
up to 1800 rpm (Max) Pressure range:
from 250 to 320 bar (Max)
[from 3625 to 4640 psi (Max)] Max torque:
143.3 Nm [105.61 lbf * ft]
S5AV Series
S5AV series are a family of variable displacement axial piston pumps designed for operation in open circuit. These axial piston swash plate design units can be used both for mobile and industrial applications. A strong and proven rotating group allows the pumps to work at high continuous and peak pressure. The pump features patented piston sliders design, resulting in minimal leaks and high volumetric efficiency. Controls provide high accuracy and repeatability. S5AV pumps operate at low noise emission levels, meeting the requirements of today's demanding industrial applications.
Displacement:
from 32 to 93.76 cm³/rev
from 1.95 to 5.72 in³/rev Flow range:
from 100 to 220 l/min
[from 26.4 to 58.1 U.S. gpm] Input speed:
up to 3150 rpm (Max) Pressure range:
from 280 to 420 bar (Max)
[from 4000 to 6000 psi (Max)] Max torque:
567 Nm [418 lbf * ft]
S6CV Series
S6CV series are variable displacement, axial piston pumps, with swash plate design, for closed circuit hydrostatic transmissions and high pressure applications. S6CV series are available in 75 and 128 cm3/rev [4.57 and 7.80 in3/rev] and with several control devices. The pump can be supplied as single or tandem version and with through drive options for the assembly of auxiliary gear pumps.
Displacement:
75, 128 cm³/rev
[4.57, 7.80 in³/rev] Flow range:
from 255 to 365 l/min
[from 67.32 to 96.30 U.S. gpm] Input speed:
Max.: up to 3600 rpm
Min.: 500 rpm Pressure range:
from 400 to 450 bar (Max)
[from 5800 to 6525 psi (Max)] Max torque:
980 Nm [722 lbf * ft]
MD10V Series
MD10V series is a family of variable displacement axial piston pumps for use in closed circuits. The displacement is variable by means of a tilting swash plate: the oil flow can therefore be reversed over the neutral point. Various controls are available: manual, servocontrol lever operated, electric etc. Each pump is provided with a charge pump that makes up for internal leakage, maintains a positive pressure in the main circuit and provides pressure to the control system. All pumps have maximum pressure relief valves and can be supplied single or tandem version. Different through drive options are available for auxiliary pump mounting as well as a wide range of options: bypass valve, pressure filter and others.
Displacement:
from 14 to 64 cm³/rev
[from 0.8 to 3.9 in³/rev] Flow range:
from 50 to 230 l/min
[from 13.2 to 60.7 U.S. gpm] Input speed:
Max: up to 3600 rpm
Min: 700 rpm Pressure range:
from 250 to 350 bar (Max)
[from 3625 to 5075 psi (Max)] Max torque:
350 Nm (257 lbf * ft)
Catalogue and Technical Literature
In this area You can only see public documents. If you want access to private documents (such as: Service Manuals, Service Bulletins, etc.) you should Register. After this operation you will receive an e-mail with Username and Password and with those You can access to private documents with the Registered Customer Login.
